Lenmar Polyurethane Products
Gloss, Semi-Gloss, Satin, Dull, Rubbed
Lenmar’s premium quality oil-modified polyurethane has been designed for the professional hardwood floor refinisher for use in both commercial and residential applications as well as gymnasiums. Its primary benefits include: superior flow out for a smooth self-leveling finish, an exceptional amount of solids for maximum build, and a tough durable film that helps resist household chemicals, marring, and scuffing when fully cured. Lenmar’s Gloss Polyurethane is MFMA Certified.
Sizes: Quarts, Gallons, Pails
SKU:1Y.555, 1Y.724, 1Y.617, 1Y.915
Lenmar Rapid Seal Sealer
RapidSeal is a new direction in solvent-borne floor sealers. A 100% oil modified sealer that dries to buff in 2-3 hours. This product is designed to work great under Lenmar’s ECH20 water based and Lenmar’s polyurethane floor finishes. This sealer allows the finisher to achieve the look of an oil-based finish with the speed of a waterborne. RapidSeal achieves excellent adhesion to properly prepared substrates, applies with a variety of applicators, flows well, self-levels, and sands easily. Lenmar’s Rapidseal sealer is MFMA Certified.
Sizes:Quarts, Gallons, Pails
Lenmar Low VOC Products
Gloss, Semi-Gloss, Satin
Lenmar’s 350 VOC Polyurethanes are OTC compliant, oil-modified urethane floor finishes that have been designed for the professional hardwood floor refinisher for use in both commercial and residential applications. These products are noted for their flow and self-leveling, with an exceptional amount of solids for maximum build, and a tough durable film that helps resist household chemicals, marring, and scuffing when fully cured. Lenmar’s Gloss 350 VOC polyurethane is MFMA Certified.
SKU:1Y.359, 1Y.356, 1Y.354
Lenmar Echo Finishing Products
Gloss, Semi-Gloss, Satin
ECH20 One Component Waterborne Urethanes combine the strength and appearance of traditional oil-modified polyurethanes, with many of the required properties of today’s environmentally friendly waterborne floor finishes. ECH20 One component finishes are recommended for both commercial and residential applications, with benefits that include superior flow and leveling properties, minimal streaking, bubbling, and grain raise. ECH20One Component finishes have excellent penetration and adhesion to properly prepared interior wood surfaces. ECH2O Gloss is MFMA Certified.
SKU:1YB.108, 1YB.106, 1YB.104
Gloss, Semi-Gloss, Satin
Endure-2K Two Component Waterborne Floor Finishes are extremely durable and designed for both commercial and residential applications. These products exhibit fast drying, low odor, exceptional solids, superior flow leveling. The Gloss product is MFMA Certified, and every sheen offers a crystal clear, non-yellowing finish, a tough, wear-resistant film, and compliance with all current VOC regulations. Endure-2K two component waterborne floor finishes must be catalyzed with 2 ounces of 1YB.1B catalyst. Once catalyzed, apply the product within 24 hours. The Endure-2K Two Component Floor Finish cross-links to form a very tough impact resistant film that offers maximum performance and durability when cured.
SKU:1YB.08A, 1YB.06A, 1YB.04A, 1YB.1B, (Activator)
Lenmar Evolution Products
Lenmar’s Evolution, Premium Waterborne Floor Finish is a revolutionary concept in waterborne coatings. With unsurpassed hardness, durability, mar and scuff resistance Evolution is the equal to all two component urethane systems, without adding hardener. While it is possible to finish the floor as a one component system, gaining all the benefits of a twocomponent, isocyanate-cured urethane, the addition of the Evolution hardener will offer better alcohol and stain resistance. Ideal as a high-end commercial or residential floor finish, Evolution maintains all the benefits of waterborne systems, including quick-drying, self-leveling and VOC compliance.
SKU:1YB.204, 1YB.202, 1YB.200B, (Activator)
Lenmar Fusion Bond
The Lenmar FusionBond Bonding Agent is a unique sand and dust free bonding coat for recoating applications. Over a properly cleaned floor, this bonding agent can save time and effort in any refinish job. With equal ease, the FusionBond Bonding Agent can stick to existing factory applied finishes, prefinished flooring, finishes with Aluminum Oxide, hand-scraped floors, waterbased finishes, and traditional urethane floor finishes. Once on the surface, the bonding agent allows for any of the Lenmar waterborne products to be used to recoat. This system should not be used where a paste wax or oil finish has previously been used. A test patch is always recommended. This is a low VOC product, and can be used in any market.
Lenmar Extreme Degreaser
Lenmar’s X-treme Degreaser is the first part of a two-step floor cleaning process designed to prepare the floor for the Lenmar Fusion Bonding Agent. X-treme Degreaser is a powerful cleaner formulated to remove oil, dirt and stubborn floor residue. This degreasing and deep cleaning process is vital to obtaining good adhesion with the Fusion Bonding Agent and should never be skipped.
Lenmar SparkLen Clean Products
Spark’Len Clean floor cleaner is designed to clean hardwood floors easily and without any film or residue left behind. Spark’Len Clean is recommended for use as a general maintenance cleaner for hardwood floors, but may also be used to clean laminate flooring. Spark’Len Clean is ideal for cleaning floors prior to recoating, but is also the second cleaning step in the Lenmar clean and prep system for refinishing hardwood floors without sanding.