3M™ Regalite™ Quick Change Discs
3M™ Regalite™ Quick Change Discs are designed to deliver maximum results in minimal time. The tool-free design means these discs can be changed and replaced on site without downtime.
Loading and changing are easier with tool-free design Discs start sharp, stay sharp and resist clogging Heavy-duty backing resists tearing Specially designed discs for floor and power tool applications Available in 5″, 6-7/8″, 7″ and 8″ sizes.
3M™ Regalite™ Edger Discs
Make sanding hardwood floors easier with the purple 3M™ Regalite™ Edger Discs. Each grade is specially engineered on heavy-duty durable paper to provide a long life, consistent finish and resistance to mineral loss. The result is a smooth, professional finish with less work and fewer hassles.
Regalite™ discs run cool, cut faster and last longer than conventional discs Each specially engineered grit provides a long life and resists loading to ensure a professional finish every time Available in an optimal size and grade range, so you can choose the ideal sandng sequence for your job Regalite™ Edger discs cut sanding time and improve productivity
3M™ Regalite™ Floor Sanding Belts
3M™ Regalite™ Floor Sanding Belts feature a sharp, tough, uniform coating of abrasive mineral that cuts fast, resists loading and runs cool. All of which makes for a quicker finish without the re-work and changeover — making your job a whole lot easier.
Sharp, durable mineral runs cool, cuts fast and consistently Reversible splice allows belt to be run in both directions for a longer life Strong, smooth splice helps eliminate chatter, making for a smooth, flat finish Special cloth backing is less likely to tear than paper, greatly reducing the chances of floor and machine damage.
3M™ Hardwood Expoxy Repair Products
A simple squeeze makes hardwood floor repair quick and easy. Now squeaks and hollow spots under hardwood floors can be repaired quickly and easily.
Repair split boards, apply or replace moldings, and make general repairs Fast cure; floor can be sanded after 20 minutes Needle tips are sized to the 3/32″ drill for a precise fit Fill hollows underneath hardwood floors; fill knotholes in rustic floors Dries translucent to let natural beauty show through Nozzle length is optimized for reach and minimal adhesive waste when cartridge is empty.
3M™ Scotch-Brite™ Surface Preparation Pad
3M™ Scotch-Brite™ Surface Preparation Pads are an excellent alternative to traditional “screen and coat” applications that traditionally were prepared with new or used screens. New screens tend to be sharp and aggressive and might cut through overwood and stained areas quickly, resulting in unwanted scratches. The grade of the used screen — and any possible contaminants — is not always a known.
Can be used with water-based or solvent-based finishes Gentle enough to use between coats Diffuses unwanted scratches Can be used with 3M™ Between Coat Hookit™ II gold discs Flexible construction conforms to uneven surfaces.