1M.530X MegaVar Plus High Build WW Conversion Varnish (1M.530X Series)

Lenmar’s 1M.5300 series, MegaVar^TM Plus High Build Catalyzed Conversion Varnish, is designed for the professional woodworker who demands maximum performance and clarity in a finish. Once catalyzed, this fast drying, non-yellowing VOC & HAPS compliant varnish offers superior protection against moisture and household chemicals. The high solids formula builds to a beautiful and exceptionally durable film that will fully cure within 2 - 3 days after final coat. The varnish requires the addition of 5 ounces of 1A.622B, Catalyst (4%) per gallon. Only catalyze enough varnish that will be applied in an 8 – 12 hour period. This varnish is recommended as a self-sealing finish over properly prepared interior wood surfaces.

ENTIRE SYSTEM SHOULD NOT EXCEED MORE THAN 5 MILS DRY. LENMAR PRODUCTS ARE DESIGNED FOR INTERIOR USE, BY SPRAY APPLICATION ONLY.

BENEFITS:

· EXCEEDS KCMA STANDARDS

· VOC & HAPS COMPLIANT

· VERY HIGH SOLIDS CONTENT

· READY TO SPRAY VISCOSITY

· SELF SEALING

· RESISTS MOISTURE

· RESISTS CHEMICALS

· 8 - 12 HOUR POT LIFE

RECOMMENDED USES:

· OFFICE FURNITURE

· DISPLAYS & FIXTURES

· KITCHEN CABINETS

· BATHROOM VANITIES

· COMMERCIAL CABINETS

· BAR TOPS

CHARACTERISTICS:

Weight Per Gallon: 8.1 – 8.3 lbs.

% Weight Solids: 49 – 51

% Volume Solids: 41 – 43

Viscosity # 2 Zahn: 16 – 20 seconds

VOC: Does not exceed 500 g/l

or 4.12 lb./gal.

HAPS: < 0.61 lb. of HAPS Per lb. of Solids

COLOR: Water White, clear

DRY TIMES @ 3 – 4 mils wet

Sand: 25 – 35 min.

Recoat: 30 – 45 min.

CLEAN UP: 1A.406 Thinner/1A.101 Acetone

DOWNLOADS

Technical Data Sheet

MSDS Sheet