Horizon Forest - 1D.32X Series UltraLaq Pro Precatalyzed Lacquer (1D.32X)

1D.32X Series UltraLaq Pro Precatalyzed Lacquer (1D.32X)

Lenmar’s UltraLaq^TM 1D.32X Series products are high quality pre-catalyzed nitrocellulose lacquers designed for professional woodworkers who demand maximum performance in a high solids, ready-to-spray finish. These products are formulated to be used as a shelf-stable precat, with 12 months of shelf life. Use the 1D.32X Series directly on properly prepared wood as a 3-coat self-sealing system. If a sealer is desired, use UltraLaq^TM 1C.360, Vinyl Sanding Sealer, or UltraLaq^TM 1C.370, Precatalyzed Vinyl Sealer. For best results, use within 12 months from date of manufacturing.

ENTIRE SYSTEM SHOULD NOT EXCEED MORE THAN 5 MILS DRY. LENMAR PRODUCTS ARE DESIGNED FOR INTERIOR USE, BY SPRAY APPLICATION ONLY.

BENEFITS:



· PASSES KCMA STANDARDS

· VOC & HAPS COMPLIANT

· HIGH SOLIDS CONTENT

· READY TO SPRAY VISCOSITY

· SELF SEALING

· RESISTS MOISTURE

· RESISTS CHEMICALS

RECOMMENDED USES:

· FINE FURNITURE

· OFFICE FURNITURE

· DISPLAYS & FIXTURES

· KITCHEN CABINETS

· BATHROOM VANITIES

· COMMERCIAL CABINETS

CHARACTERISTICS:

Weight Per Gallon: 7.5 – 7.7 lbs.

% Weight Solids: 25 – 27

% Volume Solids: 18 – 20

Viscosity # 2 Zahn Sign: 28 – 32 seconds

VOC: Does not exceed 680 g/l

           or 5.7 lb./gal.

HAPS: < 0.80 lb. of HAPS Per lb. of Solids

COLOR: Water White, clear

DRY TIMES @ 3 – 4 mils wet

Sand: 25 - 35 min.

Recoat: 30 - 45 min.

CLEAN UP: 1A.519 Thinner

DOWNLOADS

Technical Data Sheet

MSDS Sheet